CK33-HV VER:1.0
Product model |
CK33-HV VER:1.0(Used with CK33H core board) |
display |
1 * VGA port,1 * HDMI port |
network |
2* RTL8211F Gigabit network adapter |
Support Bluetooth /WIFI module |
|
|
1* TF card slot, maximum support 128G |
deposit |
Onboard Everest ES8316 Audio chip, support Line-out,MIC |
Tone frequency |
Mini-PCIE slot, support 3G/4G/5G module (includes USB3.0 signal) |
Expansion slot
I/O ports on the rear panel
|
1* DC9~24V power input interface (24V Max) |
1* HDMI port |
|
2* RJ45 Gigabit network interface |
|
1 * VGA port |
|
1* Line-out (green) |
|
1* MICK(red) |
|
I/O ports on the front panel
|
1* Power switch |
1* Power/hard disk indicator |
|
1* Burning key |
|
1* USB2.0 port (top), 1* USB3.0 port (bottom) |
|
2 * 10pin Phoenix terminal (4 * DO up /4 * DI down /VCC/GND/Power/COM3/COM4), where COM3 and COM4 support RS232 and RS485, which are implemented by jumping caps. |
|
1* MicroUSB2.0 (OTG) |
|
Built-in I/O interface
|
1* USB2.0 interface (single-layer seat) |
1* hard drive power port 1*4pin |
|
1* SATA interface (2.5-inch overhead) |
|
1* Mini-PCIE port (including USB3.0 port) |
|
The 1* COM1 interface supports RS232 and RS485 and is implemented by jumping caps |
|
The 1* COM2 interface supports RS232 and RS485 and is implemented by jumping caps |
|
1* USB2.0(external small board implementation) |
|
1* DC 9~24V power interface 1*4pin |
|
DIO |
Supports four DI's and four DO's |
Guard dog |
Support hardware reset function (256 level, 0~255 seconds) |
Operating system |
Android 7.1, Android 10, Ubuntu18.04, debian10 (used with CK33H core board) |
Power supply type |
Adopts DC 12V power supply |
Operating temperature |
0℃ to 60℃ |
Storage temperature |
-20℃ to 70℃ |
Working humidity |
5%-95% relative humidity, no condensation |
Size |
120mm*120mm*1.6mm |
PCB |
6-layer board |
Screw hole specification |
Ø3.2mm x 4 |
System and Bit Version | Driver Type | Driver Name | Download |