G3780F-P4E2 V1.0(G250)
Product characteristics ● Intel LGA1151/8-9 series processors ● 2*SODIMM DDR4 memory, up to 64GB ● 5*Intel I210AT, 4 of which support POE ● 4*RS232 DB9 serial ports, of which 2 support 485, 1 support 422, COM3~4 support CAN (need to load CAN module) ● 8*USB3.0, 2*USB2.0, 1*USB2.0 built-in ● Support DIO 7 in and 7 out tape isolation ● 1*PCIE x16(X8 signal), 1*PCIE x8 ● Support DC 9~36V wide voltage (1*4P Phoenix terminal) ● Fan heat dissipation, copper tube heat conduction
|
Model number |
G3780F-P4E2 V1.0(Z370) |
|
|
chassis
|
Material/Structure |
Aluminum alloy + sheet metal fan heat dissipation |
|
colour |
Iron gray + sand gray |
|
|
Dimensions |
229*208*125MM |
|
|
Weight (bare weight) |
4.47 KG |
|
|
Install |
Desktop/embedded /DIN rail |
|
|
Main board
|
CPU |
Intel LGA1151/8-9 series processors |
|
System chip |
Intel Z370 |
|
|
Internal memory |
2*SODIMM DDR4 memory slots, supporting a maximum of 64GB |
|
|
Front panel interface
|
Switch |
1*Power key with indicator light, 1* one key restore (and reset key to choose one), 1*ACLOSS (power on DIP switch) |
|
LED |
1*hard disk indicator |
|
|
USB |
2*USB3.0, 2 x USB2.0 |
|
|
Phoenix terminal |
1*4pin Phoenix terminal (1* power indicator signal, 1* power switch signal) |
|
|
SIM |
1*SIM standard card slot (Signal default M.2 5G) |
|
|
Rear panel interface
|
Switch |
1*Power button with indicator light, 1* one-key restore (choose one of the two reset keys) |
|
LED |
1*hard disk indicator |
|
|
Display interface |
1*VGA(1920*1200@60Hz), 1*HD OUTPUT1.4 |
|
|
COM |
4*RS232 DB9 serial ports, of which 2 support RS485, 1 support RS422, COM3~4 support CAN function (need to load CAN module) |
|
|
LAN |
5*Intel I210AT Gigabit ports, four of which support POE |
|
|
USB |
6*USB3.0 |
|
|
Phoenix terminal |
2*8pin(7 in 7 out GPIO tape isolation) |
|
|
Audio frequency |
1*Audio, Line out and MIC in one |
|
|
Dip switch |
Two sets of 6-bit dip switches. The COM3 RS232/485 switch is implemented by the COM3 DIP switch, and the COM4 RS232/485/422 switch is implemented by the COM-SW1 hop cap and COM4 DIP switch combination |
|
|
Power interface |
1*4P P=5.08mm Phoenix terminal, support DC 9~36V wide voltage input |
|
|
store
|
SATA |
1 * 2.5-inch hard disk |
|
MSATA |
1* MSATA |
|
|
M.2 |
1*M.2/SSD: Key-M, 2280, NVME PCIEx4 SSD |
|
|
extend
|
PCIE |
1*PCIE3.0 x16 slot 1*PCIE3.0 x8 slot See note 3 |
|
MINIPCIE |
1*MINIPCIE, support WiFi/4G(4G and built-in USB2.0 same signal, default built-in USB2.0) |
|
|
M.2
|
1*M.2/WiFi, supports Key-E, 2230, WiFi module |
|
|
1*M.2/5G, supports Key-B, 2242/52, 5G modules |
||
|
System support
|
Microsoft |
Windows 10 |
|
Linux |
Linux |
|
|
Power supply type input
|
Power supply type |
External power adapter |
|
Voltage input |
DC 9-36V wide voltage |
|
|
Power output |
AC TO DC more than 90W |
|
|
environment |
Operating temperature |
-10℃～50℃ |
|
Storage temperature |
-20℃～70℃ |
|
|
Relative humidity |
5%-95%relative humidity, no condensation |
|
|
Working vibration |
0.5g rms/5-500HZ/random/operating |
|
| System and Bit Version | Driver Type | Driver Name | Download |
