CPU: Intel® Celeron® 5205U dual-core 1.9 GHz, 15W TDP (8th/10th Gen Whiskey Lake-U / Comet Lake-U compatible)
Memory: 1× SODIMM DDR4-2400, up to 32 GB
Display: VGA + HDMI 1.4 + embedded DisplayPort, 4K capable
Network: 1× Gigabit Ethernet (Wake-on-LAN/PXE)
Storage/Expansion: SATA 3.0 (6Gbps), M.2 2280 NVMe/SATA, M.2 2230 Wi-Fi
I/O: 4× USB 3.0, 2× USB 2.0, RS232, PS/2, HD audio with amplifier
Power/Temp: 12V DC, -10°C to 60°C
Size: 120 × 120 mm
OS: Windows 10, Linux
Product Model | STX-F52_1L VER:1.2(5205U) |
Processor | Features an integrated 10th Generation Intel® Celeron 5205U 1.9GHz dual-core, dual-thread processor with a TDP of 15W |
Compatible with Intel® Whiskey Lake-U/Comet Lake-U 8th/10th Generation Celeron/Pentium/i3/i5/i7 low-power processors | |
Chipset | SOC |
Memory | 1x SODIMM memory slot, supporting DDR4 2400MHz memory, maximum capacity 32GB |
Display
| Integrated Intel® UHD Graphics supporting DirectX 12 and OpenGL 4.5, with 4K capability 1x VGA port, maximum supported resolution: 1920x1200@60Hz |
1x HDMI 1.4 port, maximum supported resolution: 4096×2304@24Hz | |
1x Embedded DisplayPort, maximum supported resolution: 4096×2304@60Hz | |
Network | 1x Realtek 8111H Gigabit Ethernet controller, supporting Wake-on-LAN and PXE boot functionality |
Storage
| 1x M.2 slot, supporting M.2 2280 PCIe x4 and SATA adaptive SSD |
1x 7-pin SATA 3.0 hard drive interface, transfer rate up to 6Gbps | |
Note: The 7-pin SATA and M.2 NVMe interfaces are mutually exclusive. If an NVMe M.2 SSD is used, the 7-pin SATA interface becomes unavailable. If a SATA-signalled M.2 drive is used, the 7-pin SATA interface remains functional. The default configuration is M.2 NVMe with SATA auto-adaptive. | |
Audio
| Onboard ALC897 7.1+2 high-fidelity audio controller, supporting Line Out, MIC, and amplifier |
Amplifier supports 4Ω 3W speakers | |
Expansion Slots | 1x M.2 slot supporting M.2 2230 WiFi modules |
Rear Panel I/O Ports
| 1x DC12V power input connector |
1x HDMI port | |
1x VGA port | |
1x RJ45 Gigabit Ethernet port (USB3 and LAN2 are mutually exclusive; optional dual Gigabit Ethernet ports available) | |
2x USB 2.0 ports (alternative to built-in F_USB2) | |
1* Line-out (green) | |
1* MICK (red) | |
Front Panel I/O Ports
| 4* USB 3.0 ports |
1* PS/2 keyboard/mouse combo port | |
1* Power switch | |
1* Power indicator light 1* Hard drive activity light | |
Built-in I/O Ports
| 1* EDP interface, 2*15-pin header |
1* JVGA interface, 1*12-pin (same signal as DB15) | |
2* USB 2.0 ports 2*5-pin | |
1* RS232 serial port 2*5-pin | |
1* Amplifier interface 1*4-pin | |
1* Hard Drive Power Interface 1*4-pin | |
1* Front Panel Function Button and Indicator Interface 2*5-pin | |
1* DC 12V Power Interface 1*4-pin | |
Fan Connectors | 1*4-pin CPU Intelligent Fan Interface |
GPIO | Supports 4-channel Input/Output GPIO |
BIOS | 128Mb Flash ROM |
Watchdog | Supports Hardware Reset Function (256 levels, 0–255 seconds) |
Operating System | Windows 10/Linux |
Power Supply Type | Powered by DC 12V supply |
Operating Temperature | -10°C to 60°C |
Storage Temperature | -20°C to 70°C |
Operating Humidity | 5% to 95% relative humidity, non-condensing |
Dimensions | 120mm x 120mm |
Order information
No | Model | Processor | Frequency | Memory | VGA | HDMI | EDP | LAN | USB | COM | RS485/422 | Power |
1 | STX-F52-1L VER:1.2(5205U) | 5205U | 1.90G | 1*SODDR4 | 1 | 1 | 1 | 1*8111H | 8 | 1 | / | DC12V |
1 | STX-F52_2l VER:1.2(5205U) | 5205U | 1.90G | 1*SODDR4 | 1 | 1 | 1 | 2*8111H | 8 | 1 | / | DC12V |