+8617779798609          +852 9458 7694         

Home > Products > Mini-ITX Motherboard > Baytrail/J1900 >ITX-B190K_D926L VER:1.0

  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
  • ITX-B190K_D926L VER:1.0
Baytrail/J1900

ITX-B190K_D926L VER:1.0

FEATURES
  • CPU: Intel® J1900 quad-core 2.0 GHz (Bay Trail), 10W TDP

  • Memory: 1× SODDR3L 1600/1333 MHz, up to 8 GB

  • Display: VGA + HDMI + LVDS + eDP (LVDS/eDP via jumper)

  • Network: 2× Gigabit Ethernet (Wake-on-LAN/PXE)

  • Storage/Expansion: SATA 2.0, 2.5" HDD bay, mSATA, Mini-PCIe (Wi-Fi/4G/BT), SIM slot

  • I/O: 6× RS232 (COM2 RS485/RS422), 9× USB (1× USB 3.0), LPT, PS/2, HD audio with amplifier

  • Power/Temp: 12–24V DC wide input, -10°C to 60°C, fanless

  • Size: 170 × 170 mm

  • OS: Windows 7/10, Linux


Product description

Product Model

ITX-B190K_D926L VER:1.0

Processor

Integrated Intel® Celeron J1900/2.00GHz quad-core processor, TDP 10W

Compatible with the full range of Intel® Bay Trail -I/M/D CPU, offering customers flexible choice

Chipset

Based on the Intel® Bay Trail SoC platform

Memory

1× SODDR3L memory slot, supporting single-channel 1600/1333 MHz DDR3L/1.35 V memory, with a maximum capacity of 8 GB

Display

 

 

Integrated Intel® HD Graphics

1 × VGA, 1 × HDMI, 1 × LVDS, 1 × EDP; LVDS and EDP are mutually exclusive via a jumper setting, with LVDS as the default

Supports synchronous/asynchronous display via VGA, HDMI and LVDS

Network

2 × Realtek RTL8111H Gigabit Ethernet ports, supporting Wake-on-LAN and PXE

Storage

 

 

1 × SATA 2.0 hard drive interface

1 × SATA 2.5-inch laptop hard drive bay, suitable for direct hard drive installation

1 × mSATA slot supporting SSDs, with transfer speeds up to 3 Gbps

Note: The 2.5-inch hard drive bay and 7-pin SATA are mutually exclusive; the default is the 7-pin SATA. When using the 2.5-inch hard drive bay, the 7-pin SATA cannot be used

Audio

On-board ALC662 6-channel high-fidelity audio controller, supporting MIC/Line-out and power amplifier

A 4Ω 3W speaker is recommended for the power amplifier

Expansion Slots

1 × Mini-PCIe slot, supporting Wi-Fi/4G/Bluetooth modules

Rear Panel I/O Ports

 

 

1 × HDMI display port

1 × VGA display port

1 × USB 2.0 port, 1 × USB 3.0 port

2 × RJ-45 Gigabit Ethernet ports; either LAN2 or USB1 can be used, but not both

1 × Line-out port (green), 1 × MIC port (red)

1 × DC power input port (5.5 × 2.5), supports 12–24 V DC power supply

1 × Clear CMOS button, 1 × Power-on DIP switch

On-board I/O Ports

 

 

 

 

 

 

 

 

 

1 × DC power connector, 1 × 4-pin (pitch = 2.5 mm), supports 12–24 V DC power supply

1 × USB 2.0 port, 1 × 5-pin (pitch = 2.54 mm)

6 × USB 2.0 ports, 2 × 5-pin (pitch = 2.54 mm); USB5 and USB1 are mutually exclusive

1 × J_HDMI port, 2 × 8-pin (pitch = 2.0 mm) (Same signal as HDMI1 on the backplane I/O connector)

1 × JVGA connector, 1 × 12-pin, pitch = 2.0 mm (same signal as DB15)

1 × LVDS connector, 2 × 15-pin, pitch = 2.0 mm, supporting dual-channel 24-bit,

1 × LVDS display backlight power supply connector (black), 1 × 6-pin, pitch = 2.0 mm

1* EDP interface, 2*15-pin, PH=2.0mm; either this or the LVDS interface via jumper selection; LVDS by default

1* EDP display backlight power supply interface, 1*6-pin, PH=2.0mm

1* PS/2 keyboard and mouse interface (red), 1*6-pin, PH=2.0mm

6 × RS232 serial interfaces; COM1/2: 2 × 5-pin, pitch = 2.54 mm; COM3–6: 2 × 20-pin, pitch = 2.0 mm; COM1/COM2 support pin 9 power supply; COM2 supports RS485/422 modes, configurable via jumper settings

1 × LPT parallel interface, 2 × 13-pin, pitch = 2.54 mm

1 × front audio interface: 2 × 5-pin, pitch = 2.54 mm

1 × front panel switch, button and indicator interface: 2 × 5-pin, pitch = 2.54 mm

1 × hard drive power supply interface: 1 × 4-pin, pitch = 2.0 mm

1 × Amplifier connector: 1 × 4-pin, pitch 2.0 mm

1 × SIM card slot

Fan Connectors

Fanless cooling design; includes 1 × 4-pin CPU fan connector and 1 × 3-pin system fan connector

GPIO

Supports 4-channel GPIO input/output

BIOS

64 Mb Flash ROM

Watchdog

Supports hardware reset function (256 levels, 0–255 seconds)

Operating System

Windows 7/Windows 10/Linux

Power Supply Type

Powered by 12–24 V DC

Operating Temperature

–10 °C to 60 °C

Storage Temperature

–20 °C to 70 °C

Operating Humidity

5%–95% relative humidity, non-condensing

Dimensions

170mm x 170mm

Order information

NO.

Model

Processor

Frequency

Memory

VGA

HDMI

LVDS

EDP

LAN

USB

COM

RS485/422

Power

1

ITX-B190K_D926L VER:1.0

 J1900

2.0G

1*SODDR3L

1

1

2ch*24bit

1

2*8111H

9

6

COM2

DC12V


Download
    No Data

Online Message

  • First Name*
  • Last name*
  • Company Name*
  • Email*
1 Model
$0-$0
  • Model
    Price
    Quantity
  • ITX-B190K_D926L VER:1.0
    $0.00
ltem subtotal ( 0 items) $0.00
Shipping total $0.00
Subtotal $0.00